manufacturer category series package voltage class rev . date es51c1 series ? rohs compliant (pb-free) ? temperature compensated crystal oscillator (tcxo) ? clipped sinewave output ? 5.0v supply voltage ? ceramic 10-pad smd package ? stability to 1.0ppm ? external voltage control option available ecliptek corp. oscillator es51c1 ceramic 5.0v os4j 11/08 oscillator es51c1 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. 10.000, 10.240, 10.245, 12.000, 12.288, 12.800, 13.000, 14.000, 14.400, 14.7456, 15.360, 16.000, 16.384, 16.800, 17.500, 18.432, 19.200, 19.440, 20.000, 20.480, 24.000, 24.5535, 24.576, 25.000, and 27.000mhz h 2.0 l 7.0 w 5.0 see part numbering guide 1.0ppm maximum 0.2ppm maximum 0.2ppm maximum 1ppm / year maximum see part numbering guide 5.0v dc 5% 1.5ma maximum 2.0ma maximum 2.5ma maximum 0.8vp-p clipped sinewave minimum 10kohms // 10pf 8ppm minimum 10% maximum 3khz minimum 100kohms minimum -80dbc/hz -115dbc/hz -135dbc/hz -145dbc/hz -145dbc/hz 5msec maximum -55c to 125c vs. operating temperature range vs. frequency tolerance (25c 2c, v dd = 5.0v dc , v c = 1.5v dc ) vs. input voltage (5%) vs. load (1k //1pf) 10.000mhz to 14.999999mhz 15.000mhz to 25.999999mhz 26.000mhz to 27.000mhz 1.5v dc 1.0v dc ; positive transfer characteristic measured at -3db, v c = 1.5v dc at offset of 10hz at offset of 100hz at offset of 1khz at offset of 10khz at offset of 100khz nominal frequency (mhz) frequency stability aging (at 25c) operating temperature range supply voltage (v dd ) input current output voltage load drive capability external trim (voltage control option) linearity modulation bandwidth input impedance typical phase noise (at 12.800mhz) start up time storage temperature range
manufacturer category series package voltage class rev . date ecliptek corp. oscillator es51c1 ceramic 5.0v os4j 11/08 a b c d e f 16.00.2 7.50.1 6.750.1 4.00.1 2.00.1 f g h j k l 8.00.1 b0* 1.5 +0.1-0.0 a0* 0.30 0.05 k0* tape m n o p q 1.5 min 50 min 20.2 min 13.00.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel *compliant to eia 481a mechanical dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters tape and reel dimensions all dimensions in millimeters tolerances= + 0.1 characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a solderability mil-std-883, method 2003 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-202, method 210 resistance to solvents mil-std-202, method 215 line 1: e xx.xxx frequency in mhz (5 digits maximum + decimal) line 2: xx y zz week of year last digit of year ecliptek manufacturing identifier 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. part numbering guide es51c1 c 25 v - 13.000m tr operating temperature range a=0c to 50c b=0c to 70c c=-20c to 70c d=-30c to 85c e=-40c to 85c frequency stability 10 = 1.0ppm maximum 15 = 1.5ppm maximum 20 = 2.0ppm maximum 25 = 2.5ppm maximum packaging options blank=bulk tr=tape and reel frequency external trim n=none (no connection on pin 1) v=voltage control pin 1: control voltage or no connect pin 5: case ground pin 6: output pin 10: supply voltage pin 2-4, 7-9: do not connect
|
